Valves and Controls

LIQUID LEVEL SWITCH


LIQUID LEVEL SWITCH

  • Light deep drawn body, drawn in one piece. Ball & Stem are made from SS.

  • The float chamber consists of a housing, float ball, float coil and coil enclosure.

  • The float ball is located inside the housing and moves an attached magnetic stem up or down in an enclosing tube from the top and is protected by the coil enclosure.

  • The construction permits all high voltage connections and wiring to be made at a remote or non-hazardous location.

LIQUID LEVEL SWITCH

LIQUID LEVEL SWITCH

Range Safe Working Pressure : 300 psi
Application While primarily designed for Ammonia, this control is also suitable for R-22 and other non-corrosive liquids that have a specific gravity of 0.5 or more.
The controller is ideal for the control of the operating level of liquid in liquid refrigerant accumulators and separators. Although this is normally done with a solenoid valve, the controller can activate an alarm or a pump or similar device.

© 2021. All Rights Reserved. | Developed By Illusions Brand Solutions