Industrial Automation

TOUCH KEYPAD DUAL LINE DISPLAY TIMER+COUNTER PXC266-T

TOUCH KEYPAD DUAL LINE DISPLAY TIMER+COUNTER PXC266-T

  • Voltage Monitoring.

  • Phase Sequence Monitoring.

  • Phase Loss and Phase Unbalance detection.

  • UV and OV Detection.

  • Settable UV and OV Parameter.

TOUCH KEYPAD DUAL LINE DISPLAY TIMER+COUNTER PXC266-T

Display 6 X 10mm 7 segment White display
4 X 8mm 7 segemnt Green display
Iconic LED's for Indication
Input Type For Timer: Start Input: Pulse Type:
Remote (Potential Free)
Front (Configurable)
Gate Type: Remote (Potential Free)
For Counter: Counting Input: NPN/PNP type
Input from proximity sensor/Contact Switch/Encoder

Reset Input:Remote (Potential Free)
Front (Configurable)
On Power Interruption (Configurable)
Resolution For Timer: 9.99 / 99.9 / 999 Sec
9.99 / 99.9 / 999 Min
9.99 / 99.9 / 999 Hours
Accuracy For Timer: ± 0.05% of set time/
50 m sec whichever greater
For Counter: Rate: 0.05% ± 2 counts
Set Point For Timer: Two Set points in Cyclic Mode
Single Set point in all other modes
For Counter: Two set points, each programmable from 0.0001 to 999999
Control Mode For Timer: Cyclic ON, Cyclic OFF, On Delay, Interval
For Counter: On Delay, Interval, Time Pulse Repeat, Auto Repeat
Control Output 2 Nos. Relay: 5A, 230 V AC (Resistive)
Special Function Counting Direction (Up/Down)
Supply Voltage 230 Vac, ± 15%, 50/60 Hz
12/24 Vdc on request
Communication RS485

TOUCH KEYPAD DUAL LINE DISPLAY TIMER+COUNTER PXC266-T

© 2021. All Rights Reserved. | Developed By Illusions Brand Solutions